Email:hhcasting@126.com

Contact Us

Manager:Franck

Mobile: +86-13665102324

Email: hhcasting@126.com

Skype: hoohi123

Tel: +86-510-85737583

Japanese Market:Tong san

Mobile: +86-13814297500

Email: 13814297500@163.com

Knowledge
Home > Exhibition > Content

Investment casting shell mold manufacturing

Wuxi Hoohi Engineering Co.,Ltd | Updated: Feb 01, 2016
Source:

Of investment casting mould can be divided into two entities and multilayer shell

After module dip-coating refractory coating, and refractory material shape, then through dry, hardening, so repeatedly, make the thickness of the refractory layer of the tu hung to need, thus formed a multilayer type on the module shell, usually close to the park for a period of time, make its full hardening, then fuse module, and multilayer type shell.

Multilayered shell some need packing sand filling; Some do not need, can be directly after roasting for casting.

In melting loss of casting, the shell will be affected by volume is increasing the melt die material pressure; When roasting and casting, shell each branch produce the expansion of the containment and uneven contraction, therefore, metal also high temperature chemical reactions that may occur with the shell material. So the shell has a certain performance requirements, such as small expansion rate and shrinkage; High mechanical strength, thermal shock resistance and refractoriness and chemical stability under high temperature; Shell shall also have the certain permeability, so that type of shell gas when pouring smoothly to escape. When these are linked to manufacturing shell of refractory material, binder and process.


Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML
Copyright © Wuxi Hoohi Engineering Co.,Ltd All Rights Reserved.
  • facebook
  • twitter
  • Youtube
  • gmail
  • skype

Wuxi Hoohi Engineering Co.,Ltd